Index Data Fields

 

This step allows Data Fields to be defined for use at Batch, Folder, and Document levels within the system.

Document Index Fields

These index fields are used to enter data that can be used later to perform queries and document retrieval systems and may be populated by information contained in the Folder or Batch index fields as well as the methods described below.

Folder Index Fields

These index fields are useful for creating and managing folder based capture applications, such as patient medical records and mortgage files, wherein each folder contains multiple document types that need to be organized and tracked at the folder level. The tabs within this section are the same as Document Index Fields but there are a few noted differences in the available options.

Batch Index Fields

These index fields can be defined to contain information about all the documents in the batch such as the date, user who creates the batch, box number etc. The tabs in this section are the General and Selection List tabs only and function as described below.

If the field is a Batch Index Field, the user can also perform a sum of the Document Index Field and populate this Batch Index Field with that sum automatically. This option is only available if you select a numeric Data Type and can only add Document Index Fields that have the same Data Type as the Batch Index Field. For example, if you have a Document Index Field called ‘PO Amount’ and you want to have a Batch total of all the purchase orders in said batch, a Batch Index Field called ‘Batch Total’ can be created. You would then select ‘Sum.PO Amount’ for the default value of the ‘Batch Total’ field. If the field is a Document Index Field, you can populate the Batch Index Field automatically using the contained values.

New

Index Fields may be added by pressing the ‘New’ button then entering the name of the index field and its data type in the Index Fields table.

Name

The name of the field can be anything the user chooses, but it should be descriptive so that data entry users can easily identify what data should be entered in that field. Also if the user plans to populate the field automatically using database lookup, it may be useful though not required, to name the field with the same name as the matching field name for each field in the database used to perform the lookup.

Data Type

The following Data Types are available for index fields:

  • Text – any character
  • Number – numbers with decimal places
  • Currency – numbers with 2 decimal places
  • Whole Number – numbers with no decimal places
  • Decimal– numbers only with decimal places
  • Date/Time – date and time (use default values to specify date only)
  • Yes/No – Boolean yes or no
  • Memo – large text field

Delete

Select the row of the field that you would like to delete and press delete

Move Up

Select the row of the field that you would like to move up in the order of the fields

Move Down

Select the row of the field that you would like to move down in the order of the fields


Document Index Fields: General

NOTE: The user must select one of the defined fields in order to configure the General, Advanced, Barcodes, List, or Zone tabs for that field. The field highlighted is displayed as shown regardless of which tab the user selects.

Document Index Field Definition

Default Value

This option allows the user to specify a default value in which to populate this field. This can either be a predefined default value, chosen from the system defined list or a manually entered value.

 

The following system defined default values can also be selected:

NOTE: Depending on the Data Type of the field chosen items in this list may or may not be present

  • Today’s Date – mmddyyyy (as defined in your local windows system)
  • Today’s Date/Time – mmddyyy.hhmmss (as defined in your local windows system)
  • Document Type Name – the name of this document type
  • User Name – the logged in domain user name (Example: PSIGEN\scanner1)
  • User Name (No Domain)–the logged in user name only (Example: scanner1)
  • Capture Station – the name of the station used to capture the batch
  • Batch Name – the batch name
  • Folder Separator Value – the value used to separate the Folder (usually a barcode value) Folder Index fields only
  • Document Separator Value – the value used to separate the document (usually a barcode value)
  • Folder Name – the value of the name of the folder
  • Folder Number – the number of the folder relative to the batch it is contained in
  • Document Number – the number of the document number relative to the batch it is contained in
  • Document Page Count – the number of pages in the document
  • Import Filename – the windows filename including its extension
  • Import Filename(no extension) – the windows filename without its extension
  • Import File Path – shows the file path if the import source is from a local or a mapped drive
  • Import File UNC Path – shows the file path if the import source is from a network location
  • Import File Directory Path – shows the file directory path if the import source is from a local or mapped drive
  • Import File Directory UNC Path – shows the file directory path if the import source is from a network location
  • Import File Create Date – the date which the file is created
  • Import File Create Date/Time – the date/time which the file is created
  • Import File Modify Date – the date which the file was last modified
  • Import File Modify Date/Time – the date/time which the file was last modified
  • Import Path Elements (1-10) – the path elements of the file (example C:\Images\best buy\sales orders\00001.tif –if during the Import or Auto Import process the users selection was best buy then selecting Import Path Element 2 would place “sales orders” in the index field
  • Import Path Parent (1-10)– the parent path elements of the file (example C:\Images\best buy\sales orders\00001.tif –if during the Import or Auto Import process the users root selection was the sales orders directory then selecting Import Parent Path Element 1 would place Images in the index field
  • Begin Bates Stamp (1-5)– the position of the begin bates stamp value to put in this index field
  • End Bates Stamp (1-5)– the position of the end bates stamp value to put in this index field
  • OCR Value– future function
  • Begin Imprinted Value – the begin imprinted value of each document
  • End Imprinted Value– the last imprinted value of each document

NOTE: Additional options will appear after defining Batch or Folder Index Fields. They will appear as [Batch Field.(the name of the field)] or [Folder Field.(the name of the field)] which allows the user to automatically populate the Document Index Field with those Batch or Folder Field values.

Input Mask

There many options that may be selected that will limit what the user can enter into the field when manually indexing. This feature provides a visual mask and forces the user manually indexing to adhere to the defined format. Choose from a number of commonly used masks via the dropdown list, or write custom masks with Regular Expressions. NOTE: this feature in NOT used in validation and is not used for validation when auto populating a field but it may be required to display the return values in that field.

Press  to reveal the following list:

CharacterDescription
#Digit placeholder - Character must be numeric (0-9) and entry is required.
.Decimal placeholder - The actual character used is the one specified as the decimal placeholder by the system's international settings. This character is treated as a literal for masking purposes.
,Thousands separator - The actual character used is the one specified as the thousands separator by the system's international settings. This character is treated as a literal for masking purposes.
:Time separator - The actual character used is the one specified as the time separator by the system's international settings. This character is treated as a literal for masking purposes.
/Date separator - The actual character used is the one specified as the date separator by the system's international settings. This character is treated as a literal for masking purposes.
\Treat the next character in the mask string as a literal. This allows you to include the '#', '&', 'A', and '?' as well as other characters with special meanings in the mask. This character is treated as a literal for masking purposes.
&Character placeholder - Valid values for this placeholder are ANSI characters in the following ranges: 32-126 and 128-255 (keyboard and foreign symbol characters).
>Convert all the characters that follow to uppercase.
<Convert all the characters that follow to lowercase.
AAlphanumeric character placeholder - For example: a-z, A-Z, or 0-9. Character entry is required.
aAlphanumeric character placeholder - For example: a-z, A-Z, or 0-9. Character entry is not required.
9Digit placeholder - Character must be numeric (0-9) but entry is not required.
-Minus sign when followed by a number section defined by series of 'n's (like in "-nn,nnn.nn") indicates that negative numbers are allowed. When not followed by a series of 'n's, it's taken as a literal. Minus sign will only be shown when the number is actually negative.
+Plus sign when followed by a number section defined by series of 'n's (like in "-nn,nnn.nn") indicates that negative numbers are allowed. However, it differs from '-' in the respect that it will always show a '+' or a '-' sign depending on whether the number is positive or negative.
CCharacter or space placeholder - Character entry is not required. This operates exactly like the '&' placeholder, and ensures compatibility with Microsoft Access.
?Letter placeholder - For example: a-z or A-Z. Character entry is not required.
nDigit placeholder - A group of n's can be used to create a numeric section where numbers are entered from right to left. Character must be numeric (0-9) but entry is not required.
mm, dd, yyCombination of these three special tokens can be used to define a date mask. mm for month, dd for day, yy for two digit year and yyyy for four digit year. Examples: mm/dd/yyyy, yyyy/mm/dd, mm/yy.
hh, mm, ss, ttCombination of these three special tokens can be used to define a time mask. hh for hour, mm for minute, ss for second, and tt for AP/PM. Examples: hh:mm, hh:mmtt, hh:mm:ss.
{date}{date} token is a place holder for short date input. The date mask is derived using the underlying culture settings.
{time}{time} token is a place holder for short time input. Short time typically does not include the seconds portion. The time mask is derived using the underlying culture settings.
{longtime}{longtime} token is a place holder for long time input. Long time typically includes the seconds portion. The long time mask is derived using the underlying culture settings.
{double:i.f:c}{double:i.f:c} is a place holder for a mask that allows floating point input where i and f in i.f specify the number of digits in the integer and fraction portions respectively. The :c portion of the mask is optional and it specifies that the inputting of the value should be done continuous across fraction and integer portions. For example, with :c in the mask, in order to enter 12.34 the user types in "1234". Notice that the decimal separator character is missing. This alleviates the user from having to type in the decimal separator.
{double:-i.f:c}Same as {double:i.f:c} except this allows negative numbers.
{currency:i.f:c}Same as {double:i.f:c} except the mask is constructed based on currency formatting information of the underlying format provider or the culture. It typically has the currency symbol and also displays the group characters.
{currency:-i.f:c}Same as {currency:i.f:c} except this allows negative numbers.
LiteralAll other symbols are displayed as literals; that is, they appear as themselves.

You can also escape the mask with {LOC} character sequence to indicate that symbols in the following table should be mapped to the associated symbols in the underlying culture settings.

CharacterDefinition
$Currency Symbol
/Date Separator
:

Time Separator

,Thousands Separator
.Decimal Separator
+Positive Sign
-Negative Sign
Min. Length

This defines the Minimum length of ‘Text’ ‘Data Type’ fields ONLY. If the length of the populated data is less than the minimum length, validation will fail on that document.

Max. Length

This defines the Maximum length of ‘Text’ ‘Data Type’ fields ONLY. If the length of the populated data is greater than the maximum length, validation will fail on that document.

Custom

User can create a custom index field with the use of Constants and/or a combination of other Fields. Click “Build” to create a Custom Index Field.

Record Type

In multiple record indexing mode where record types had previously been defined, each index field can be assigned to a specific record type, or be shared among all record types. NOTE: “Allow Multiple Records Per Document” and “Support Document Record Types” must be enabled and configured in Document Type Configuration/General (Part 2) in order to make a selection.

Auto Populated Data Options

Truncate to Max. Length

Select this option for Text’ ‘Data Type’ fields that are being populated automatically by methods like barcode, zone OCR, Database Lookup etc., where the desired result is NOT to have data in excess of the Max Length value populate the field.

Ignore Length

Select this option for Text’ ‘Data Type’ fields that are being populated automatically by methods like barcode, zone OCR, Database Lookup etc., where the desired result is to have all data regardless of the Max Length value populate the field. Max Length will be ignored during validation if data is auto populated.

Auto Increment

This allows a numeric field to be setup to be an auto-incremented number.

Setup

Auto Increment Configuration
Auto Increment Options

Selecting “New Counter Per Batch” will cause the counter to start at the Start Value with each new batch.

 

 

 

 

Setup

Selecting Setup will bring up the main Configuration Shared Counters Setup Counters dialog box allowing the user to choose one of the defined counters or create a new one. See the Shared Counters in the System Configuration section of this manual for more information.

Start Value

The value the user wishes to start incrementing from.

Increment By

The value the user wishes to increment by.

Update subsequent items after value changed

Select this option will cause subsequent records after the record being changed to also be changed accordingly (example: record 3 has the value 3 and the user changes it to 5 and the Increment By value is 1 then record 4 will have the value 6).

Trim Whitespace

Deletes whitespace at the end of any values entered in the index field.

Field Options

Required

Whether this field requires data to be entered.

Skip

If selected, this field will be skipped over when the user presses tab or enter during navigation between index fields.

Sticky

If selected the data in this field will remain in this field for each following document until changed. Click “Setup” to choose to populate subsequent fields with the entire value or a subset value. In order to determine the subset, a start and end position must be defined.

Read Only

Whether this field is read only.

Hide

If selected, this field will not be displayed to the user.

Re-Key

This option is used in conjunction with a second index workflow step. Once this option is selected, the field will need to be re-entered. When re-entering a field in Re-index (the second Index step in the workflow), if the re-entered value does not match the previously entered data, the user will be warned that the expected value was the value first keyed and then prompted to either keep the original value or override it with the newly entered value.

Regex

Further manipulate the data entered in the index field through the use of Regular Expression. Click “Setup” to configure.

This displays expressions currently in use. Click “Add” to add more.

For more information on Regular Expressions please see ADE or do a simple search on the internet. PSI:Capture utilizes the .Net standard for Regular Expression usage

User can write custom expressions or click “Select From Global List” to display Regular Expressions Manager and chose pre-existing expressions.

Synchronized

Synchronized is used for multi-record processing and causes the selected index field to remain constant between all records on that document. Any changes to one record will update this index field on all other records for the active document.

Auto Casing

Use Custom Validation Script

Use scripts to validate each index field after entered. Click “Edit” to bring up the Script Editor. Click “Edit” to bring up the Script Editor.

For more information on scripting please see the scripting section of this Administrators Guide.

Document Index Fields: Advanced

Additional options for auto populated data is configured here. You now have the ability to link specific regular expressions to Record Types. This technology is key in processing different forms, and allows extensive flexibility in data extraction.

Auto Populated Data Settings

Populate Index Field with

Populate index field with Entire Value, Matching Word Only, and Matching Word Only Custom Format.

 

 

 

 

 

 

 

 

 

 

 

Match Expressions

Use regular expressions to extract and format data from captured images to populate image fields. 

 Clicking on this gear icon will open the Match Expressions dialog, and allow you to assign the expression to All Record Types, or to pick and choose the Record Types that will use the chosen expression.

NOTE: As of v5.4.1.7, we have added the ability to assign the expression to All Classification Forms, or to pick and choose the Classifications Forms that will use the chosen expression.

Add/Edit

Brings up Regular Expression Editor to input expression(s).

Remove

Deletes unwanted expressions

Custom Format

Chose between the whole capture, group 1, group 2, etc.

Example Expression - (?<Group1>[0-9]+)

Sources to Process

Use check boxes to select where match expressions are used to extract index data containing matching words.

Import File/Folder Name Parsing for Default Value

Entire File/Folder Name

The entire file or folder name will be placed in the highlighted index field.

 

Subset

The value to be placed in the index field will be positional based on what is set in the Start Position and the End Position. In this example only the first 4 characters of the file name would be placed there.

 

Split

The value to be placed in the index field will be determined by a split character. In this example (fred_123456_utah.tif) the “_” is the split character and element 2 is 123456.

 

Document Index Fields: Barcodes

The Barcodes tab specifies whether the selected document index field should be populated using a barcode value. Index fields can be populated by either barcode mapping or with a barcode processing script.

Barcode Mapping

Selecting the Map Field to Barcode Number allows the user to designate which physical or logical (if splitting – see the Document Type Configuration (Step 4 of 9) /Recognition /Barcode Detection/Barcode Splitting section of this manual) barcode number to the current field. The following options are available for barcode mapping:

Barcode X in Document

Maps to the specified barcode number in the document.

Barcode X on Page X

Maps to the specified barcode number on a particular page of the document.

Barcode X on Folder Separator Sheet

Maps to the specified barcode number on the Folder Separator Sheet.

Barcode X on Document Separator Sheet

Maps to the specified barcode number on the Document Separator Sheet.

Barcode X in Zone Y

Maps to the specified barcode number within a specified zone in the document. This zone can be defined to be anywhere on the document including on a specified page.

Define Zones

Select this to define a new zone.

Zone Configuration

The Icons at the top of the above screen allow the user to: Select a template image, save the template with zones, point, manually draw zones, select predefined zones, copy zones, delete zones, group zones, select an area to zoom, zoom in and zoom out.

Anchoring Type

Choose from the Top Left of Page, Barcode, Patch Code, Zone OCR Expression, or Precision OMR Timing Tracks.

Barcode

NOTE: if you use a Barcode the type and pattern you select must be on the  selected and match

 

 

 

 

 

 

Barcode Type

Choose a specific type of barcode or all supported barcode types.

Preview

Define Zones

Select this to define a new zone.

Zoom in to the desired area leaving room to maneuver. Then select the draw zones Icon and draw the zone(s). Name the zone and fill out which page of the document it is expected to be found on. The Zone Names are kept in a list for use anywhere in the program that the user can Define Zones. NOTE: The Page of the template and its Resolution is displayed at the bottom of the screen and they MUST match the page and resolution at capture time.

 - delete the highlighted unwanted zone. Note: If a Zone is in use by any Document Type, the zone cannot be deleted.

 - ungroup a cluster of child zones contained within the selected zone (child zones are used for OMR purposes).

Barcode Type

The following 1D barcode font types are supported: Australia Post, Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, Intelligent Mail, Interleaved 2 of 5, ITF 14, Planet, Plus 2, Plus 5, Postnet, RM4SCC, Rss 14, Rss 14 Limited, Telepen, UPC-A, UPC-E

The following 2D barcode font types are supported: Data Matrix, Micro QR, PDF417 and QR

Barcode Parsing

The user may select to populate the field with the entire contents (default) of the selected barcode or to populate the field with a subset of the barcode. If a subset of the barcode is specified, select the Start Position and End Position of the characters in the barcode to be placed in the current field. NOTE: If the barcodes in question do NOT contain fixed length values an unexpected result will occur. See Barcode Splitting in the Document Type Configuration\Recognition\Barcode Detection section of this Manual for other options or use Scripting.

Populate field with entire barcode

The entire barcode value will be placed in the index field.

 

Populate field with subset of barcode

The value to be placed in the index field will be positional based on what is set in the Start Position and the End Position. In this example only the first 4 characters of the file name would be placed there.

Use Barcode Processing Script

Use script to extract specific data from barcodes that are inconsistent in length and/or content. Click “Edit” to bring up the Script Editor.

For more information on scripting please see the scripting section of this Administrators Manual. NOTE: Scripting within PSI:Capture requires knowledge of the C# programming language.

Generic example script

Document Index Fields: List

List Definition

Select the option “Use selection list for field” to create a specific list of values for the highlighted index field. These values can be used during the indexing process to populate the index field.

New

Select new to add values to the list. The user can specify separate display and data values for each entry. For example the display value may be “New York City” and the Data Value “NYC”. The Data Value is the value that actually is placed in the field once this item is selected during Index.

Delete

Select a list entry and press delete to remove it from the list.

Up/Down

Select a list entry and press up or down to change its position in the.

Limit user entry to items defined in list

Select this feature if the desired result is to limit the user to items in this list only.

Sort list alphabetically

Select this feature to sort the list alphabetically in the dropdown list during indexing.

NOTE: list boxes automatically support type ahead. For large lists the user may choose the Lookups function in Document Type Configuration/Advanced Indexing.

Document Index Fields: Zone

NOTE: Although OMR or OCR zones may be defined on the folder index fields they are only processed on the folder separator sheet. Conversely OMR or OCR may occur on any image within the document.

Actions:

  • None
  • Zoom Only (No Recognition)
  • OCR – Optical Character Recognition
  • ICR – Intelligent Character Recognition (Handwriting)
  • OMR – Optical Mark Recognition
  • On Demand OCR/ICR Only

Define Zones

Select this to define a new zone.

The Icons at the top of the above screen allow the user to:

 - Save Zone Settings - saves the zone settings for the current profile

 - Select Profile - Opens the profile you want to use for zone configuration

 - Copy Current Proflle - Enables user to duplicate profiles for other documents

 - Add Blank Profile - Create a new profile

 - Delete Current Profile - Deletes the current profile open

 - Displays name of current profile selected

 - Select Template Image - load a template image

 - Capture Template Image - allows user to capture a template image from a capture device

 - Pointer – standard mouse pointer (selecting by default)

 - Draw Zone (1) – manually draw an OCR zone

 - Draw OMR Zone (2) – manually draw and OMR zone

 - Draw Smart Zone (4) - manually draw a smart zone

 - Draw Precision OMR Zone (3) 

 - Auto Sized Zones – select from a list to draw a new zone on the described area

New Feature

Users now have the ability to define Dynamic Zones (i.e. Full Page, Bottom Half, etc.) that autosize based on the size of the image being processed. When adding a new Auto Sized Zone, user will be prompted on whether they want this to be a Dynamic zone or not.

If they want to change the dynamic zone setting on an existing zone, they can do so on the Advanced Zone settings dialog.

NOTE: Dynamic zones are not limited to just zones created using the Auto Sized Zone menu. Any standard or smart zone can have the dynamic zone setting enabled.


 - Make Copy of Current Zone - repeat a zone (use this to make OMR configuration quick)

 - Delete Selected Zones – deletes the selected zones

 - Rerun Auto Zone Creation - no longer requires a new template image to be loaded each time it is to be used

 - Grouping Tools – group multiple zones for OMR purposes. Select Create OMR Zone or Create Multi-Record Line Item Zone

 - Zone Display - allows user to select which zones to show

 - Selection Zoom - Select an area to zoom

 - Zoom In – increase the size of the image

 - Zoom Out – decrease the size of the image

 - Rotate Left - rotate document image left

 - Rotate Right - rotate document image right

Zone Definition Profile

Name - Enter a unique name for your zone definition profile

Description - Enter a description of your zone definition profile

Trigger Settings (Trigger) - Choose when to trigger the definition profile during capture

  • No Zone Definition Profile Trigger
  • Activate on Record Type
  • Activate on Classification Form ID
  • Activate on Page Orientation
  • Activate on script
Zones

Zoom in to the desired area leaving room to maneuver. Then select the draw zones Icon and draw the zone.

Zone Name and Page

Name the zone and fill out which page of the document it is expected to be found on. The Zone Names are kept in a list for use anywhere in the program that the user can Define ZonesNOTE: The Page of the template and its Resolution is displayed at the bottom of the screen and they MUST match the page and resolution at capture time.

 - Delete Zone - delete the highlighted unwanted zone. Note: If a Zone is in use by any Document Type, the zone cannot be deleted.

 - Image Processing - apply image processing to the zone template image.

 - Zone Preview - preview OCR results on printed text in the selected zone.

 - Ungroup Child Zones - ungroup a cluster of child zones contained within the selected zone (child zones are used for OMR purposes).

 - Advanced Settings

NOTE: If a Zone is in use in any Document Type the red X will be grayed out.

Anchoring Type

Select Add to create an anchor

Anchor Name - A unique name to identify the anchor

Process Anchor On All Pages - Check this box if you want to use this anchor on all the pages of the batch.

Anchoring Type - The following anchor types are available for use:

  • Default (Top Left of Page)
    • Page Image to use for Anchoring
      • Main Image
      • Original Image
      • Alternate Image
    • Alternate Image Tag
  • Fixed Point
    • Page Image to use for Anchoring
      • Main Image
      • Original Image
      • Alternate Image
    • Alternate Image Tag
    • Anchor Point
      • Top Left
      • Top
      • Top Right
      • Left
      • Right
      • Bottom Left
      • Bottom
      • Bottom Right
  • Barcode - choose the barcode type and pattern (must match)
    • Page Image to use for Anchoring
      • Main Image
      • Original Image
      • Alternate Image
    • Alternate Image Tag
    • Barcode Type
      • None
      • All Selected Barcode Types
      • Aztec
      • BCD Matrix
      • Codabar
      • Code 128
      • 2 of 5 Inverted
      • Code 32
      • Code 39
      • Code 93
      • Datalogic 2 of 5
      • Data Matrix
      • EAN-13
      • EAN-8
      • GS1-128 (UCC/EAN-128)
      • IATA 2 of 5
      • Industrial 2 of 5
      • Intelligent Mail
      • Interleaved 2 of 5
      • Matrix 2 of 5
      • PDF 17
      • Plus 2
      • Plus 5
      • Postnet
      • QR Code
      • Royal Mail (RM4SCC)
      • UPC-A
      • UPC-E
    • Barcode Pattern
    • Preview
  • Patch Code
    • Page Image to use for Anchoring
      • Main Image
      • Original Image
      • Alternate Image
    • Alternate Image Tag
    • Patch Code Type
      • Patch II
      • Patch III
      • Patch T
    • Patch Code Number
  • Zone OCR Expression
    • Page Image to use for Anchoring
      • Main Image
      • Original Image
      • Alternate Image
    • Alternate Image Tag
    • Zone OCR Text
    • Zone to Search Anchor For
      • <Entire Page>
      • Other options include current configured zones
  • Precision OMR Time Tracks
    • Page Image to use for Anchoring
      • Main Image
      • Original Image
      • Alternate Image
    • Alternate Image Tag
Image Processing

Select Configure to add image processing to the template document. For more details on the image processing options click here.

Zone Definition

Action: None

No zone related functions are performed.

Action: Zoom Only (No Recognition)

No recognition will be performed on the defined zone. However, when the user selects the index field box in the Capture and Index modules or in the QA module if defined and the feature “Zoom to zone for index fields with zones defined” is select in the Quality Assurance Settings configuration screens, the document will be zoomed in based on the defined zone. This can be helpful during manual indexing to make text easier to read. This can also be described as a Zoom Assisted Key from Image Capability.

Choose a zone name from the “Zone” drop down list or select Define Zones to define a new zone.

Disable page change for Zoom Only Zones

Prevents the viewer from changing the page when this index field becomes active

 

 

 

 

 

 

Action: OCR/ICR

Selecting this option will cause the OCR/ICR engine to attempt to OCR/ICR the contents of the selected zone and populate the index field for the current document. This process will occur either during auto-indexing or when the field is selected during manually indexing. NOTE: Zone OCR/ICR if defined for Folder fields runs on the Folder Separator Sheet ONLY.

Zone OCR/ICR Options: General

Zone

Choose a zone name from the “Zone” drop down list or select Define Zones to define a new zone.

Show Zone Popup Window when Indexing

Selecting this option causes a floating popup window to appear when indexing is active in the product.

Don’t run Zone OCR if field is already populated

Skip OCR/ICR if there is already data in the index field.

Page Processing Option

Choose pages from the document for the recognition engine to process. Select from Defined Page, First Page, Last Page, or All Pages.

Skip Document Separator/Skip Folder Separator

Choose to skip the document or folder separator pages.

 

 

 

Zone OCR/ICR Options: Character Filtering

Character Filter

If a zone is known to contain either only numeric or only alpha characters, the OCR results can be filtered to return only those characters by specifying that option in the Filter. If the OCR text contains both alpha and numeric characters, then set this to All Characters. Some possible options are All Characters, Alpha Only, Numeric Only, Numeric Extended (0-9,$,%,#,+,- ..), Date (0-9./-) and Extended Characters Only, Standard Printable Characters.

 

 

 

 

 

 

 

 

 

 

Enable Extended Characters

This setting allows user to include additional characters that would not have been included based on the Character Filter option selected above. For instance, if you have a zone that contains numeric characters and the letters A, B, and C you may set the Character Filter to Numeric Characters Only, Enable Extended Characters, and add A, B, and C into the Extended Characters List. By doing this, there will be better OCR results than if the user had simply set the Character Filter to ‘All Characters’.

Click “Enter Characters” to add characters to the character filter.

Invalid Character Action

Do Not Correct

This populates with all characters detected by the OCR/ICR engine. There may be chances for inaccuracies.

Remove

All invalid characters as chosen from the character filter will be deleted from the return value.

Auto Correct

This option will find and replace all invalid characters with user specified characters defined in the following list:

Auto Correction Settings

The user can Add or Remove settings to enhance the quality of the OCR. For example in the table above if the OCR engine returns an alpha O and the Character Filter + Extended Characters are expecting 0-9 and a, b or c. The character placed in the field would be a zero (0).

 

 

 

 

 

 

 

 

 

Replace with Marker

Invalid Character Marking

Choose a valid character to put in place of an invalid character that has been deleted. NOTE: replacing invalid characters with a character that is invalid for that fields data type will cause either no data to be returned or errors to occur. (ie). an * when the fields data type is numeric.

Character Filtering Processing

Choose to filter the entire OCR/ICR zone or only on certain matching words when detected.

Action: OMR

Choose a zone name from the “Zone” drop down list or select Define Zones to define a new zone. NOTE: For folder fields the template must be a part of the folder separator sheet.

Zone OMR Options

Attach Single Zone

Select from the previously defined zones.

Attaching f1to the field “Facility” will cause the box with the most filled value and its corresponding value to be placed in the “Facility” field. ie. The first box is marked, then “SM” is placed in the “Facility” field.

Select a Zone from the drop down.

Attach Multiple Zones

Add Zone

Select from the previously defined zones in the order in which concatenation is desired.

 

 

 

 

 

 

Below is a look at previously defined zones.

ZONE: dd1 - Notice that in the example to the left the values for each row or zone would need to be concatenated to build a valid date. In order to achieve this zone dd1-dd8 are concatenated in the attach multiple zones dialog. Ie {Z:dd1}{Z:dd2}{Z:dd3}{Z:dd4}{Z:dd5}{Z:dd6}{Z:dd7}{Z:dd8}

 

 

 

 

 

 

 

 

 

Replacement Values

No Mark Detected

Define a character to populate a field when no mark is detected (default is *). Manual indexing is needed for these type of documents.

Multiple Mark Detected

Define a character to populate a field when multiple marks are detected (default is *). Manual indexing is needed for these types of documents. NOTE: It is critical that the template is BLANK (without marks) as base weights are assigned when selecting save in the define zone screen.

Action: On Demand OCR/ICR Only

Also known as rubber band OCR or drag and drop OCR; selecting this option will cause the OCR/ICR engine to attempt to OCR/ICR the contents of the area drawn by the user during manual indexing and populate the index field. NOTE: There is no need to define the zone for this function because the zone will be hand drawn during manual indexing, as shown in the example below:

Zone On Demand OCR/ICR: Character Filtering

Character Filter

If a zone is known to contain either only numeric or only alpha characters, the OCR results can be filtered to return only those characters by specifying that option in the Filter. If the OCR text contains both alpha and numeric characters, then set this to All Characters. Some possible options are All Characters, Alpha Only, Numeric Only, Numeric Extended (0-9,$,%,#,+,- ..), Date (0-9./-) and Extended Characters Only, Standard Printable Characters.

 

 

 

 

 

 

 

 

Enable Extended Characters

This setting allows user to include additional characters that would not have been included based on the Character Filter option selected above. For instance, if you have a zone that contains numeric characters and the letters A, B, and C you may set the Character Filter to Numeric Characters Only, Enable Extended Characters, and add A, B, and C into the Extended Characters List. By doing this, there will be better OCR results than if the user had simply set the Character Filter to ‘All Characters’.

Click “Enter Characters” to add characters to the character filter.

Enter each individual extended character to the list.

For example, If you wanted all Letters and Numbers you should select “Alpha Only” and then enter “1234567890” into the extended characters list.

 

 

 

Invalid Character Action

Do Not Correct

This will populates with all characters detected by the OCR/ICR engine. There may be chances for inaccuracies.

Remove

All invalid characters as chosen from the character filter will be deleted from the return value.

Auto Correct

This option will find and replace all invalid characters with user specified characters defined in the following list:

Auto Correction Settings

The user can Add or Remove settings to enhance the quality of the OCR. For example in the table above if the OCR engine returns an alpha O and the Character Filter + Extended Characters are expecting 0-9 and a, b or c. The character placed in the field would be a zero (0).

 

 

 

 

 

 

 

 

 

Replace with Marker

Invalid Character Marking

Choose a valid character to put in place of an invalid character that has been deleted. NOTE: replacing invalid characters with a character that is invalid for that fields data type will cause either no data to be returned or errors to occur. (ie). an * when the fields data type is numeric.

Character Filtering Processing

Choose to filter the entire OCR/ICR area or only on certain matching words when detected.


Folder Index Fields: General

Folder Index Field Definition

Default Value

This option allows the user to specify a default value in which to populate this field. This can either be a predefined default value, chosen from the system defined list or a manually entered value.

NOTE: Depending on the Data Type of the field chosen items in this list may or may not be present

NOTE: Additional options will appear after defining Batch Index Fields. They will appear as [Batch Field.(the name of the field)] or [Folder Field.(the name of the field)] which allows the user to automatically populate the Folder Index Field with those Batch Field values.

NOTE: To see the complete list of options, see Document Index Fields: General.

Input Mask

There many options that may be selected that will limit what the user can enter into the field when manually indexing. This feature provides a visual mask and forces the user manually indexing to adhere to the defined format. Choose from a number of commonly used masks via the dropdown list, or write custom masks with Regular Expressions. NOTE: this feature in NOT used in validation and is not used for validation when auto populating a field but it may be required to display the return values in that field

NOTE: Press  to see the complete list of options, or refer to Document Index Fields: General.

Min. Length

This defines the Minimum length of ‘Text’ ‘Data Type’ fields ONLY. If the length of the populated data is less than the minimum length, validation will fail on that document.

Max. Length

This defines the Maximum length of ‘Text’ ‘Data Type’ fields ONLY. If the length of the populated data is greater than the maximum length, validation will fail on that document.

Custom

User can create a custom index field with the use of Constants and/or a combination of other Fields. Click “Build” to create a Custom Index Field.

Auto Populated Data Options

Truncate to Max. Length

Select this option for Text’ ‘Data Type’ fields that are being populated automatically by methods like barcode, zone OCR, Database Lookup etc., where the desired result is NOT to have data in excess of the Max Length value populate the field.

Ignore Length

Select this option for Text’ ‘Data Type’ fields that are being populated automatically by methods like barcode, zone OCR, Database Lookup etc., where the desired result is to have all data regardless of the Max Length value populate the field. Max Length will be ignored during validation if data is auto populated.

Auto Increment

This allows a numeric field to be setup to be an auto-incremented number.

Setup

Auto Increment Configuration

Auto Increment Options

Selecting “New Counter Per Batch” will cause the counter to start at the Start Value each batch.

Setup

Selecting Setup will bring up the main Configuration Shared Counters Setup Counters dialog box allowing the user to choose one of the defined counters or create a new one. See the Shared Counters in the System Configuration section of this manual for more information.

 

 

Start Value

The value the user wishes to start incrementing from.

Increment By

The value the user wishes to increment by.

Update subsequent items after value changed

Select this option will cause subsequent records after the record being changed to also be changed accordingly (example: record 3 has the value 3 and the user changes it to 5 and the Increment By value is 1 then record 4 will have the value 6).

Trim Whitespace

Deletes whitespace at the end of any values entered in the index field.

Field Options

Read Only

Whether this field is read only.

Hide

If selected, this field will not be displayed to the user.

 

Re-Key

This option is used in conjunction with a second index workflow step. Once this option is selected, the field will need to be re-entered. When re-entering a field in Re-index (the second Index step in the workflow), if the re-entered value does not match the previously entered data, the user will be warned that the expected value was the value first keyed and then prompted to either keep the original value or override it with the newly entered value.

Required

Whether this field requires data to be entered.

Skip

If selected, this field will be skipped over when the user presses tab or enter during navigation between index fields.

Regex

Further manipulate the data entered in the index field through the use of Regular Expression. Click “Setup” to configure.

Displays expressions currently in use. Click “Add” to add more.

User can write custom expressions or click “Select From Global List” to display Regular Expressions Manager and chose pre-existing expressions.

Sticky

If selected the data in this field will remain in this field for each following document until changed. Click “Setup” to choose to populate subsequent fields with the entire value or a subset value. In order to determine the subset, a start and end position must be defined.

Auto Casing

Options Include:

  • All characters to Uppercase
  • All characters to Lowercase
  • Title Case – First letter of each word capitalized
  • Sentence Case – First letter of first word
Use Custom Validation Script

Use scripts to validate each index field after entered. Click “Edit” to bring up the Script Editor. Click “Edit” to bring up the Script Editor.

Folder Index Fields: Advanced

Additional options for auto populated data is configured here.

Auto Populated Data Settings

Populate Index Field with

Populate index field with Entire Value, Matching Word Only, and Matching Word Only Custom Format.

Match Expressions

Use regular expressions to extract and format data from captured images to populate image fields.

Add/Edit

Brings up Regular Expression Editor to input expression(s)

Remove

Deletes unwanted expressions

Custom Format

Chose between the whole capture, group 1, group 2, etc.

Sources to Process

Use check boxes to select where match expressions are used to extract index data containing matching words.

Sources:

            • Barcodes
  • Data Files
  • Default Values
  • Image Tags
  • Import File Metadata
  • Lookups
  • PDF Fields
  • Zone OCR/ICR
  • Zone OMR
  • On Demand OCR/ICR

Folder Index Fields: Barcodes

The Barcodes tab specifies whether the selected document index field should be populated using a barcode value. Index fields can be populated by either barcode mapping or with a barcode processing script.

Barcode Mapping

Selecting the Map Field to Barcode Number allows the user to designate which physical or logical (if splitting – see the Document Type Configuration (Step 4 of 9) section of this manual) barcode number to the current field. The following options are available for barcode mapping:

Barcode X on Folder Separator Sheet

Maps to the specified barcode number on the Folder Separator Sheet.

Barcode X in Zone Y

Maps to the specified barcode number within a specified zone in the document. This zone can be defined to be anywhere on the document including on a specified page.

Define Zones

Select this to define a new zone.

Zone Configuration

The Icons at the top of the above screen allow the user to: Select a template image, save the template with zones, point, manually draw zones, select predefined zones, copy zones, delete zones, group zones, select an area to zoom, zoom in and zoom out.

Anchoring Type

Choose from the Top Left of Page, Barcode, Patch Code, Zone OCR Expression, or Precision OMR Timing Tracks.

Barcode

NOTE: if you use a Barcode the type and pattern you select must be on the selected page and match

 

 

 

 

 

 

Barcode Type

Choose a specific type of barcode or all supported barcode types.

Preview

Define Zones

Select this to define a new zone.

Zoom in to the desired area leaving room to maneuver. Then select the draw zones Icon and draw the zone(s). Name the zone and fill out which page of the document it is expected to be found on. The Zone Names are kept in a list for use anywhere in the program that the user can Define Zones. NOTE: The Page of the template and its Resolution is displayed at the bottom of the screen and they MUST match the page and resolution at capture time.

 - delete the highlighted unwanted zone. NOTE: If a Zone is in use by any Document Type, the zone cannot be deleted and will appear greyed out.

 - ungroup a cluster of child zones contained within the selected zone (child zones are used for OMR purposes).

Barcode Type

The following 1D barcode font types are supported: Australia Post, Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, Intelligent Mail, Interleaved 2 of 5, ITF 14, Planet, Plus 2, Plus 5, Postnet, RM4SCC, Rss 14, Rss 14 Limited, Telepen, UPC-A, UPC-E

The following 2D barcode font types are supported: Data Matrix, Micro QR, PDF417 and QR.

Barcode Parsing

The user may select to populate the field with the entire contents (default) of the selected barcode or to populate the field with a subset of the barcode. If a subset of the barcode is specified, select the Start Position and End Position of the characters in the barcode to be placed in the current field. NOTE: If the barcodes in question do NOT contain fixed length values an unexpected result will occur. See Barcode Splitting in the Document Type Configuration\Recognition\Barcode Detection section of this Manual for other options or use Scripting.

Populate field with entire barcode

The entire barcode value will be placed in the index field.

 

Populate field with subset of barcode

The value to be placed in the index field will be positional based on what is set in the Start Position and the End Position. In this example only the first 4 characters of the file name would be placed there.

Use Custom Validation Script

Use scripts to validate each index field after entered. Click “Edit” to bring up the Script Editor. Click “Edit” to bring up the Script Editor.

Folder Index Fields: List

List Definition

Select the option “Use selection list for field” to create a specific list of values for the highlighted index field. These values can be used during the indexing process to populate the index field.

New

Select new to add values to the list. The user can specify separate display and data values for each entry. For example the display value may be “New York City” and the Data Value “NYC”. The Data Value is the value that actually is placed in the field once this item is selected during Index.

Delete

Select a list entry and press delete to remove it from the list.

Up/Down

Select a list entry and press up or down to change its position in the.

Limit user entry to items defined in list

Select this feature if the desired result is to limit the user to items in this list only.

Sort list alphabetically

Select this feature to sort the list alphabetically in the dropdown list during indexing.

NOTE: list boxes automatically support type ahead. For large lists the user may choose the Lookups function in Document Type Configuration/Advanced Indexing.

Folder Index Fields: Zone

NOTE: Although OMR or OCR zones may be defined on the folder index fields they are only processed on the folder separator sheet. Conversely OMR or OCR may occur on any image within the document.

Actions:

  • None
  • Zoom Only (No Recognition)
  • OCR – Optical Character Recognition
  • ICR – Intelligent Character Recognition (Handwriting)
  • OMR – Optical Mark Recognition
  • On Demand OCR/ICR Only

Define Zones

Select this to define a new zone:

 

The Icons at the top of the above screen allow the user to:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Icons at the top of the above screen allow the user to:

 - Save Zone Settings - saves the zone settings for the current profile

 - Select Profile - Opens the profile you want to use for zone configuration

 - Copy Current Proflle - Enables user to duplicate profiles for other documents

 - Add Blank Profile - Create a new profile

 - Delete Current Profile - Deletes the current profile open

 - Displays name of current profile selected

 - Select Template Image - load a template image

 - Capture Template Image - allows user to capture a template image from a capture device

 - Pointer – standard mouse pointer (selecting by default)

 - Draw Zone (1) – manually draw an OCR zone

 - Draw OMR Zone (2) – manually draw and OMR zone

 - Draw Smart Zone (4) - manually draw a smart zone

 - Draw Precision OMR Zone (3) 

 - Auto Sized Zones – select from a list to draw a new zone on the described area

New Feature

Users now have the ability to define Dynamic Zones (i.e. Full Page, Bottom Half, etc.) that autosize based on the size of the image being processed. When adding a new Auto Sized Zone, user will be prompted on whether they want this to be a Dynamic zone or not.

If they want to change the dynamic zone setting on an existing zone, they can do so on the Advanced Zone settings dialog.

NOTE: Dynamic zones are not limited to just zones created using the Auto Sized Zone menu. Any standard or smart zone can have the dynamic zone setting enabled.

 - Make Copy of Current Zone - repeat a zone (use this to make OMR configuration quick)

 - Delete Selected Zones – deletes the selected zones

 - Rerun Auto Zone Creation - no longer requires a new template image to be loaded each time it is to be used

 - Grouping Tools – group multiple zones for OMR purposes. Select Create OMR Zone or Create Multi-Record Line Item Zone

 - Zone Display - allows user to select which zones to show

 - Selection Zoom - Select an area to zoom

 - Zoom In – increase the size of the image

 - Zoom Out – decrease the size of the image

 - Rotate Left - rotate document image left

 - Rotate Right - rotate document image right

Anchoring Type

Select Default (Top Left of Page)

Select Patch Code and choose the patch code type and which one of that type on the template.

Select Barcode and choose the barcode type and pattern (must match).

Defined Zones

Zoom in to the desired area leaving room to maneuver. Then select the draw zones Icon and draw the zone.

Zone Name and Page

Name the zone and fill out which page of the document it is expected to be found on. The Zone Names are kept in a list for use anywhere in the program that the user can Define ZonesNOTE: The Page of the template and its Resolution is displayed at the bottom of the screen and they MUST match the page and resolution at capture time.

 - delete the highlighted unwanted zone. Note: If a Zone is in use by any Document Type, the zone cannot be deleted.

 - apply image processing to the zone template image.

 - preview OCR results on printed text in the selected zone.

 - preview ICR results on handwritten text in the selected zone.

 - ungroup a cluster of child zones contained within the selected zone (child zones are used for OMR purposes).

NOTE: If a Zone is in use in any Document Type the red X will be grayed out.

Zone Definition

Action: None

No zone related functions are performed.

Action: Zoom Only (No Recognition)

No recognition will be performed on the defined zone. However, when the user selects the index field box in the Capture and Index modules or in the QA module if defined and the feature “Zoom to zone for index fields with zones defined” is select in the Quality Assurance Settings configuration screens, the document will be zoomed in based on the defined zone. This can be helpful during manual indexing to make text easier to read. This can also be described as a Zoom Assisted Key from Image Capability.

Choose a zone name from the “Zone” drop down list or select Define Zones to define a new zone.

Disable page change for Zoom Only Zones

Prevents the viewer from changing the page when this index field becomes active

 

 

 

 

 

 

Action: OCR/ICR

Selecting this option will cause the OCR/ICR engine to attempt to OCR/ICR the contents of the selected zone and populate the index field for the current document. This process will occur either during auto-indexing or when the field is selected during manually indexing. NOTE: Zone OCR/ICR if defined for Folder fields runs on the Folder Separator Sheet ONLY.

Zone OCR/ICR Options: General

Zone

Choose a zone name from the “Zone” drop down list or select Define Zones to define a new zone.

Show Zone Popup Window when Indexing

Selecting this option causes a floating popup window to appear when indexing is active in the product.

Don’t run Zone OCR if field is already populated

Skip OCR/ICR if there is already data in the index field.

Page Processing Option

Choose pages from the document for the recognition engine to process. Select from Defined Page, First Page, Last Page, or All Pages.

Skip Document Separator/Skip Folder Separator

Choose to skip the document or folder separator pages.

 

 

 

Zone OCR/ICR Options: Character Filtering

Character Filter

If a zone is known to contain either only numeric or only alpha characters, the OCR results can be filtered to return only those characters by specifying that option in the Filter. If the OCR text contains both alpha and numeric characters, then set this to All Characters. Some possible options are All Characters, Alpha Only, Numeric Only, Numeric Extended (0-9,$,%,#,+,- ..), Date (0-9./-) and Extended Characters Only, Standard Printable Characters.

 

 

 

 

 

 

 

 

 

 

Enable Extended Characters

This setting allows user to include additional characters that would not have been included based on the Character Filter option selected above. For instance, if you have a zone that contains numeric characters and the letters A, B, and C you may set the Character Filter to Numeric Characters Only, Enable Extended Characters, and add A, B, and C into the Extended Characters List. By doing this, there will be better OCR results than if the user had simply set the Character Filter to ‘All Characters’.

Click “Enter Characters” to add characters to the character filter.

Invalid Character Action

Do Not Correct

This populates with all characters detected by the OCR/ICR engine. There may be chances for inaccuracies.

Remove

All invalid characters as chosen from the character filter will be deleted from the return value.

Auto Correct

This option will find and replace all invalid characters with user specified characters defined in the following list:

Auto Correction Settings

The user can Add or Remove settings to enhance the quality of the OCR. For example in the table above if the OCR engine returns an alpha O and the Character Filter + Extended Characters are expecting 0-9 and a, b or c. The character placed in the field would be a zero (0).

 

 

 

 

 

 

 

 

 

Replace with Marker

Invalid Character Marking

Choose a valid character to put in place of an invalid character that has been deleted. NOTE: replacing invalid characters with a character that is invalid for that fields data type will cause either no data to be returned or errors to occur. (ie). an * when the fields data type is numeric.

Character Filtering Processing

Choose to filter the entire OCR/ICR zone or only on certain matching words when detected.

Action: OMR

Choose a zone name from the “Zone” drop down list or select Define Zones to define a new zone. NOTE: For folder fields the template must be a part of the folder separator sheet.

Zone OMR Options

Attach Single Zone

Select from the previously defined zones.

Attaching f1 to the field “Facility” will cause the box with the most filled value and its corresponding value to be placed in the “Facility” field. ie. The first box is marked, then “SM” is placed in the “Facility” field.

Select a Zone from the drop down.

Attach Multiple Zones

Add Zone

Select from the previously defined zones in the order in which concatenation is desired.

 

 

 

 

 

 

Below is a look at previously defined zones.

ZONE: dd1 - Notice that in the example to the left the values for each row or zone would need to be concatenated to build a valid date. In order to achieve this zone dd1-dd8 are concatenated in the attach multiple zones dialog. Ie {Z:dd1}{Z:dd2}{Z:dd3}{Z:dd4}{Z:dd5}{Z:dd6}{Z:dd7}{Z:dd8}

 

 

 

 

 

 

 

 

 

Replacement Values

No Mark Detected

Define a character to populate a field when no mark is detected (default is *). Manual indexing is needed for these type of documents.

Multiple Mark Detected

Define a character to populate a field when multiple marks are detected (default is *). Manual indexing is needed for these types of documents. NOTE: It is critical that the template is BLANK (without marks) as base weights are assigned when selecting save in the define zone screen.

Action: On Demand OCR/ICR Only

Also known as rubber band OCR or drag and drop OCR; selecting this option will cause the OCR/ICR engine to attempt to OCR/ICR the contents of the area drawn by the user during manual indexing and populate the index field. NOTE: There is no need to define the zone for this function because the zone will be hand drawn during manual indexing, as shown in the example below:

Zone On Demand OCR/ICR: Character Filtering

Character Filter

If a zone is known to contain either only numeric or only alpha characters, the OCR results can be filtered to return only those characters by specifying that option in the Filter. If the OCR text contains both alpha and numeric characters, then set this to All Characters. Some possible options are All Characters, Alpha OnlyNumeric Only, Numeric Extended (0-9,$,%,#,+,- ..)Date (0-9./-) and Extended Characters OnlyStandard Printable Characters.

 

 

 

 

 

 

 

 

Enable Extended Characters

This setting allows user to include additional characters that would not have been included based on the Character Filter option selected above. For instance, if you have a zone that contains numeric characters and the letters A, B, and C you may set the Character Filter to Numeric Characters Only, Enable Extended Characters, and add A, B, and C into the Extended Characters List. By doing this, there will be better OCR results than if the user had simply set the Character Filter to ‘All Characters’.

Click “Enter Characters” to add characters to the character filter.

Enter each individual extended character to the list.

For example, If you wanted all Letters and Numbers you should select “Alpha Only” and then enter “1234567890” into the extended characters list.

 

 

 

Invalid Character Action

Do Not Correct

This will populates with all characters detected by the OCR/ICR engine. There may be chances for inaccuracies.

Remove

All invalid characters as chosen from the character filter will be deleted from the return value.

Auto Correct

This option will find and replace all invalid characters with user specified characters defined in the following list:

Auto Correction Settings

The user can Add or Remove settings to enhance the quality of the OCR. For example in the table above if the OCR engine returns an alpha O and the Character Filter + Extended Characters are expecting 0-9 and a, b or c. The character placed in the field would be a zero (0).

 

 

 

 

 

 

 

 

 

Replace with Marker

Invalid Character Marking

Choose a valid character to put in place of an invalid character that has been deleted. NOTE: replacing invalid characters with a character that is invalid for that fields data type will cause either no data to be returned or errors to occur. (ie). an * when the fields data type is numeric.

Character Filtering Processing

Choose to filter the entire OCR/ICR area or only on certain matching words when detected.


Batch Index Fields: General

Batch Index Field Definition

Default Value

This option allows the user to specify a default value in which to populate this field. This can either be a predefined default value, chosen from the system defined list or a manually entered value.

NOTE: To see the complete list of options, see Document Index Fields: General.

 

 

Input Mask

There many options that may be selected that will limit what the user can enter into the field when manually indexing. This feature provides a visual mask and forces the user manually indexing to adhere to the defined format. Choose from a number of commonly used masks via the dropdown list, or write custom masks with Regular Expressions. NOTE: this feature in NOT used in validation and is not used for validation when auto populating a field but it may be required to display the return values in that field

NOTE: Press  to see the complete list of options, or refer to Document Index Fields: General

Min. Length

This defines the Minimum length of ‘Text’ ‘Data Type’ fields ONLY. If the length of the populated data is less than the minimum length, validation will fail on that document.

Max. Length

This defines the Maximum length of ‘Text’ ‘Data Type’ fields ONLY. If the length of the populated data is greater than the maximum length, validation will fail on that document.

Custom

User can create a custom index field with the use of Constants and/or a combination of other Fields. Click “Build” to create a Custom Index Field.

Auto Populated Data Options

Truncate to Max. Length

Select this option for Text’ ‘Data Type’ fields that are being populated automatically by methods like barcode, zone OCR, Database Lookup etc., where the desired result is NOT to have data in excess of the Max Length value populate the field.

Ignore Length

Select this option for Text’ ‘Data Type’ fields that are being populated automatically by methods like barcode, zone OCR, Database Lookup etc., where the desired result is to have all data regardless of the Max Length value populate the field. Max Length will be ignored during validation if data is auto populated.

Trim Whitespace

Deletes whitespace at the end of any values entered in the index field.

Field Options

Read Only

Whether this field is read only.

Hide

If selected, this field will not be displayed to the user.

Required

Whether this field requires data to be entered.

Skip

If selected, this field will be skipped over when the user presses tab or enter during navigation between index fields.

Regex

Further manipulate the data entered in the index field through the use of Regular Expression. Click “Setup” to configure.

Displays expressions currently in use. Click “Add” to add more.

User can write custom expressions or click “Select From Global List” to display Regular Expressions Manager and chose pre-existing expressions.

Auto Casing

Automatically adjust the case of characters enter into this field.

Use Custom Validation Script

Use scripts to validate each index field after entered. Click “Edit” to bring up the Script Editor. Click “Edit” to bring up the Script Editor. See scripting section in this Administrators Manual for additional information.

Batch Index Fields: Advanced

Additional options for auto populated data are configured here.

Auto Populated Data Settings

Populate Index Field with

Populate index field with Entire Value, Matching Word Only, and Matching Word Only Custom Format.

Match Expressions

Use regular expressions to extract and format data from captured images to populate image fields.

Add/Edit

Brings up Regular Expression Editor to input expression(s).

Remove

Deletes unwanted expressions.

Custom Format

Chose between the whole capture, group 1, group 2, etc.

Sources to Process

Use check boxes to select where match expressions are used to extract index data containing matching words.

 

 

 

 

 

Batch Index Fields: List

List Definition

Select the option “Use selection list for field” to create a specific list of values for the highlighted index field. These values can be used during the indexing process to populate the index field.

New

Select new to add values to the list. The user can specify separate display and data values for each entry. For example the display value may be “New York City” and the Data Value “NYC”. The Data Value is the value that actually is placed in the field once this item is selected during Index.

Delete

Select a list entry and press delete to remove it from the list.

Up/Down

Select a list entry and press up or down to change its position in the.

Limit user entry to items defined in list

Select this feature if the desired result is to limit the user to items in this list only.

Sort list alphabetically

Select this feature to sort the list alphabetically in the dropdown list during indexing.

NOTE: list boxes automatically support type ahead. For large lists the user may choose the Lookups function in Document Type Configuration/Advanced Indexing.

The Icons at the top of the above screen allow the user to:

 - Save Zone Settings - saves the zone settings for the current profile

 - Select Profile - Opens the profile you want to use for zone configuration

 - Copy Current Proflle - Enables user to duplicate profiles for other documents

 - Add Blank Profile - Create a new profile

 - Delete Current Profile - Deletes the current profile open

 - Displays name of current profile selected

 - Select Template Image - load a template image

 - Capture Template Image - allows user to capture a template image from a capture device

 - Pointer – standard mouse pointer (selecting by default)

 - Draw Zone (1) – manually draw an OCR zone

 - Draw OMR Zone (2) – manually draw and OMR zone

 - Draw Smart Zone (4) - manually draw a smart zone

 - Draw Precision OMR Zone (3) 

 - Auto Sized Zones – select from a list to draw a new zone on the described area

On this page:

Related Pages: